Indian Plastic Directory of Manufacturers, Exporters, Importers, Consultants, Service Providers, Reprocessors, Plastic Raw Materials , Plastic Machinery , Speciality Chemicals, Plastic Moulds and dies, Plastic Packaging and Printing Products.
Advantages
Highest tensile strength of all processable
fluorocarbons. Good radiation resistance
(better than other fluorocarbons).
Melt processable. Good abrasion resistance.
Good general chemical resistance,
although inferior to PTFE. Maximum
use temperature 150°C (300°F).
Useful piezo-electric properties.
Disadvantages
High dissipation factor. Processing
machinery needs to be very clean.
Normally cannot reinforce with glass
fibres due to decomposition initiated
by boron. Poor resistance to fuming
acids.
Typical
Properties
Property
Value
Density
(g/cm3)
Surface Hardness
Tensile Strength (MPa)
Flexural Modulus (GPa)
Notched Izod (kJ/m)
Linear Expansion (/°C
x 10-5)
Elongation at Break (%)
Strain at Yield (%)
Max. Operating Temp. (°C)
Water Absorption (%)
Oxygen Index (%)
Flammability UL94
Volume Resistivity (log
ohm.cm)
Dielectric Strength (MV/m)
Dissipation Factor 1kHz
Dielectric Constant 1kHz
HDT @ 0.45 MPa (°C)
HDT @ 1.80 MPa (°C)
Material. Drying hrs @ (°C)
Melting Temp. Range (°C)
Mould Shrinkage (%)
Mould Temp. Range (°C)
Plastic
Brief
