|
Reliance Industries Limited
|
|
POLYPROPYLENE
|
| REPOL H110MA |
HOMOPOLYMER |
| |
| Product description &
applications : |
Features
: |
|
REPOL Polypropylene H110MA is manufactured
using Unipol PP process which combines the production
efficiency of gas phase fluidized bed reactor technology
with the high activity and stereo specificity of the
SHAC catalyst system.
REPOL H110MA is recommended forinjection
moulding of intricate parts where long flow paths are
involved. Repol H110MA is an ideal choice for moulding
rigid containers, themowares and housewares. It is also
suitable as a compounding base and blending material
in furniture compound. Repol H110MA contains antistatic
agent that reduces static charge build-up on products.
|
Repol
H110MA is designed to provide
- Low static charge buildup and reduced dust pickup
- Consistent processabillity
- Excellent colour and processing stability
|
| |
| Typical properties
of Repol H110MA are as follows: |
| |
| Property |
ASTM Test
Method |
Unit |
Typical Value*. |
| Melt flow index,(230oc/2.16Kg) |
D 1238 |
g/10 min |
11.0 |
| Tensile Strength
at yield (50 mm/min ) |
D 638$ |
MPa |
36 |
| Elongation at
yield (50 mm/min ) |
D 638$ |
% |
10 |
| Flexural modulus
(1% secant) |
D 790A$ |
MPa |
1650 |
| Notched izod
impact strength (23oc) |
D 256$ |
J/m |
27 |
| Heat deflection
temperature (455 kPa) |
D 648 |
oC |
104 |
| |
| |
|
$ : ASTM D638 Type I specimen injection moulded and
tested in accordance with ASTM D4101.
|
|
|
|
Repol H110MA meets the requirements stipulated in IS
10910-1984 on on "Specification for Polypropylene and
its copolymers for safe use in contact with foodstuffs,
pharmaceuticals, and drinking water". Additives incorporated
in this grade conform to the positive list of constituents
as prescribed in IS-10909-1984.The grade and the additives
incorporated in it also comply with the FDA:CFR Title
21, 177.1520, Olefin polymers.
|
|
|
|
REPOL is the registered trademark for Polypropylene
from Reliance Industries Limited
|
|
|
|
* Typical valuesw with injection moulded specimens,
not to be taken as specification
|
|
The data, information and suggestions contained contained
herein are given purely as a guide. Reliance Industries
Limited and Reliance Group Companies undertake no responsibility
either for the results deriving from their adoption
or for possible position in apparent contrast with existing
patent rights.
|
| |
| |
Resin
Datasheets
