| ASTM STANDARDS
- CELLULAR PLASTICS |
| Spcecifications
for: |
|
| D
3490 - 80 (1990) |
Flexible
Cellular Materials-Bonded Urethane Foam |
| D
3770 - 91 |
Flexible
Cellular Materials-High-Resilience Polyurethane
Foam (HR) and Combustion Modified High Resilience
(CMHR) Polyurethane Foam |
| D
1055 - 90 |
Flexible
Cellular Materials-Latex Foam |
| D
4819 - 96 |
Flexible
Cellular Materials Made From Polyolefin Plastics |
| D
1056 - 91 |
Flexible
Cellular Materials-Sponge or Expanded Rubber |
| D
3453 - 96 |
Flexible
Cellular Materials-Urethane for Furniture and Automotive
Cushioning, Bedding, and Similar Applications |
| D
1667 - 76 (1990) |
Flexible
Cellular Materials-Vinyl Chloride Polymers and Copolmers
(Closed-Cell Foam) |
| D
1565 - 81 (1990) |
Flexible
Cellular Materials-Vinyl Chloride Polymers and Copolmers
(Open-Cell Foam) |
| D
3676 - 96a |
Rubber
Cellular Cushion Used for Carpet or Rug Underlay |
| D
3851 - 84 (1990) |
Urethane
Microcellular Shoe Soling Materials |
| D
1786 - 96 |
Toluenediisocyanate |
| Test
Methods for: |
|
| D
3576 - 94 |
Cell
Size of Rigid Cellular Plastics |
| D
4986 - 95 |
Cellular
Polymeric Materials, Horizontal burning Characteristics
of |
| D
1621 - 94 |
Compressive
Properties of Rigid Cellular Plastics |
| D
1622 - 93 |
Density,
Apparent, of Rigid Cellular Plastics |
| D
3014 - 94 |
Flame
Height, Time of Burning, and Loss of Mass of Rigid
Thermoset Cellular Plastics in a Vertical Position |
| D
5132 - 93 (1994)61 |
Flexible
Cellular and Rubber Materials Used in Occupant Compartments
of Motor Vehicles, Horizontal Burining Rate of |
| D
3575 - 93 |
Flexible
Cellular Materials Made From Olefin Polymers |
| D
5672 - 95 |
Flexible
Cellular Materials-Measurement of Indentation Force
Deflection Using a 25-mm (1-in.) Deflection Technique |
| D
3675 - 95 |
Flexible
Cellular Materials Using a Radiant Heat Energy Source,
Surface Flammability of |
| D
3768 - 96 |
Microcellular
Urethanes-Flexural Recovery |
| D
3769 - 96 |
Microcellular
Urethanes-High-Temperature Sag |
| D
2856 - 94 |
Open
Cell Content of Rigid Cellular Plastics by the Air
Pycnometer |
| D
4274 - 94 |
Polyurethane
Polyol Raw Materials: Determination of Hydroxyl
Numbers of Polyols |
| D
5523 - 94 |
Polyurethane
Raw Materials: Acidity by Argentometric Determination
of Hydrolyzable Chlorine in Monomeric, Aromatic
Isocyanates |
| D
4662 - 93 |
Polyurethane
Raw Materials: Determination of Acid and Alkalinity
Numbers of Polyols |
| D
5629 - 94 |
Polyurethane
Raw Materials: Determination of Acidity in Low Acidity
Aromatic Isocyanates and Polyurethane Prepolymers |
| D
4667 - 93 |
Polyurethane
Raw Materials: Determination of Acidity in Toluene
Diisocyanate |
| D
4876 - 93 |
Polyurethane
Raw Materials: Determination of Acidity of Crude
or Modified Isocyanates |
| D
4877 - 93 |
Polyurethane
Raw Materials: Determination of APHA Color in Isocyanates |
| D
4664 - 93 |
Polyurethane
Raw Materials: Determination of Freezing Point of
Toluene Diisocyanate Mixtures |
| D
4890 - 93 |
Polyurethane
Raw Materials: Determination of Gardner APHA Color
of Polyols |
| D
4663 - 93 |
Polyurethane
Raw Materials: Determination of Hydrolyzable Chlorine
of Isocyanates |
| D
4660 - 95 |
Polyurethane
Raw Materials: Determination of the Isomer Content
of Toluenediisocyanate |
| D
4875 - 94 |
Polyurethane
Raw Materials: Determination of the Polymerized
Ethylene Oxide Content of Polyether Polyols |
| D
4273 - 94 |
Polyurethane
Raw Materials: Determination of Primary Hydroxyl
Contents of Polyether Polyols |
| D
4659 - 93 |
Polyurethane
Raw Materials: Determination of Specific Gravity
of Isocyanates |
| D
4669 - 93 |
Polyurethane
Raw Materials: Determination of Specific Gravity
of Polyols |
| D
4661 - 93 |
Polyurethane
Raw Materials: Determination of Total Chlorine in
Isocyanates |
| D
4671 - 93 |
Polyurethane
Raw Materials: Determination of Unsaturation of
Polyols |
| D
4889 - 93 |
Polyurethane
Raw Materials: Determination of Viscosity of Crude
or Modified Isocyanates |
| D
4878 - 93 |
Polyurethane
Raw Materials: Determination of Viscosity of Polyols |
| D
4672 - 95 |
Polyurethane
Raw Materials: Determination of Water Content of
Polyols |
| D
2126 - 94 |
Response
of Rigid Cellular Plastics to Thermal and Humid
Aging |
| D
3489 - 96 |
Rubber-Microcellular
Urethane |
| D
5308 - 92 |
Semi-Flexible
Cellular Urethanes for Automotive and Similar Energy
Absorption Applications |
| D
1623 - 78 (1995) |
Tensile
and Tensile Adhesion Properties of Rigid Cellular
Plastics |
| D
4670 - 92 |
Urethane
Raw Materials: Determination of suspended Matter
in Polyols |
| D
2842 - 94 |
Water
Absorption of Rigid Cellular Plastics |
| D
5155 - 96 |
Polyurethane
Raw materials: Determination of Isocyanate Content
of Aromatic Isocyanates |
| D
3574 - 95 |
Flexible
Cellular Materials-Slab, Bonded, and Molded Urethane
Foams |
| Practices
for: |
|
| D
3748 - 94 |
High-Density
Rigid Cellular Thermoplastics, Evaluating |
Quality
& Standards
