| ASTM
STANDARDS - THERMOPLASTIC MATERIALS |
| Specifications
for: |
| D 4181 - 96 |
Acetal (POM) Molding
and Extrusion Materials |
| D 4673 - 96 |
Acrylonitrile-Butadiene-Styrene
(ABS) Molding and Extrusion Materials |
| D 4441 - 96 |
Aqueous Dispersions
of Polytetrafluoroethylene |
| D 706
- 96 |
Cellulose
Acetate Molding and Extrusion Compounds |
| D 707 - 96 |
Cellulose Acetate
Butyrate Molding and Extrusion Compounds |
| D 1562 - 96 |
Cellulose Propionate
Molding and Extrusion Compounds |
| D 5575 - 94 |
Copolymers of Vinylidene
Fluoride (VDF) with Other Fluorinated Monomers |
| D 3275 - 91a |
E-CTFE-Fluoroplastic
Molding, Extrusion, and Coating Materials |
| D 3159 - 95a |
ETFE-Fluoropolymer
Molding, Modified, and Extrusion Materials |
| D 787 - 96 |
Ethyl Cellulose
Molding and Extrusion Compounds |
| D 2116 - 96 |
FEP-Fluorocarbon
Molding and Extrusion Materials |
| D 3368 - 94 |
FEP-Fluorocarbon
Resin Sheet and Film |
| D 3296 - 93 |
FEP-Fluorocarbon
Tubing |
| D 5675 - 95a |
Fluoroploymer Micropowders |
| D 4066 - 96a |
Nylon Injection
and Extrusion Materials |
| D 789 - 96 |
Polyamide (PA),
Relative Viscosity, Melting Point, and Moisture
Content, Determination of |
| D 3307 - 93 |
PFA-Fluorocarbon
Molding and Extrusion Materials |
| D 3935 - 94 |
Polycarbonate (PC)
Unfilled and Reinforced Materials |
| D 1430 - 95 |
Polychlorotrifluoroethylene
(PCTFE) Plastics |
| D 4549 - 95 |
Polystyrene Molding
and Extrusion Materials (PS) |
| D 3915 - 96 |
Poly(Vinyl Chloride)
(PVC) and Related Plastic Pipe and Fitting Compounds
for Pressure Applications |
| D 1755 - 92 |
Poly(Vinyl Chloride)
Resins |
| D 1784 - 96 |
Poly(Vinyl Chloride)
(PVC) Compounds and Chlorinated Poly(Vinyl Chloride)
(CPVC) Compounds, Rigid |
| D 3222 - 91a |
Unmodified Poly(Vinylidene
Fluoride) (PVDF) Molding, Extrusion Coating and
Materials |
| D 4969 - 91a61 |
PTFE Coated Glass
Fabric |
| D 1457 - 92 |
Polytetrafluoroethylene
(PTFE) Molding and Extrusion Materials |
| D 3294 - 91a |
PTFE Resin Molded
Basic Shapes |
| D 3293 - 91a (1996) |
PTFE Resin Molded
Sheet |
| D 3308 - 91a |
PTFE Resin Skived
Tape |
| D 3295 - 96 |
PTFE Tubing |
| D 5857 - 96 |
Propylene Plastic
Injection and Extrusion Materials Using ISO Protocol
and Methodology |
| D 3965 - 94 |
Rigid Acrylonitrile-Butadiene-Styrene
(ABS) Compounds for Pipe and Fittings |
| D 4216 - 92 |
Rigid Poly(Vinyl
Chloride) (PVC) and Related Plastic Building Products
Compounds |
| D 4396 - 96 |
Rigid Poly(Vinyl
Chloride) (PVC) and Related Plastic Compounds for
Nonpressure Piping Products |
| D 4203 - 95 |
Styrene-Acrylonitrile
(SAN) Injection and Extrusion Materials |
| D 4474 - 96 |
Styrenic Thermoplastic
Elastomer Injection Molding and Extrusion Materials
(TES) |
| D 3369 - 96 |
Polytetrafluoroethylene
PTFE-Fluorocarbon Resin Cast Film |
| D 1710 - 96 |
Polytetrafluoroethylene
(PTFE) Basic Shapes, Rod, and Heavy-Walled Tubing |
| D 5021 - 95 |
Thermoplastic Elastomer
Chlorinated Ethylene Alloy (TECEA) |
| D 4550 - 9261 |
Thermoplastic Elastomer-Ether-Ester
(TEEE) |
| D 5927 - 96a |
Thermoplastic Polyester
(TPES) Injection and Extrusion Materials Based on
ISO Test Methods |
| D 4507 - 93a |
Thermoplastic Polyester
(TPES) Materials |
| D 4020 - 96 |
Ultra-High-Molecular-Weight
Polyethylene Molding and Extrusion Materials |
| D 2474 - 92 |
Vinyl Chloride Copolymer
Resins |
| D 2287 - 96 |
Vinyl Chloride Polymer
and Copolymer Molding and Extrusion Compounds, Nonrigid |
| D 729 - 95 |
Vinylidene Chloride
Molding Compounds |
| Specification
for: |
| D 1047 - 95 |
Poly(Vinyl Chloride)
Jacket for Wire and Cable (see Vol. 10.01) |
| D 2219 - 93 |
Poly(Vinyl Chloride)
Insulation for Wire and Cable, 60°C Operation (see
Vol. 10.01) |
| D 2220 - 93 |
Poly(Vinyl Chloride)
Insulation for Wire and Cable, 75°C Operation (see
Vol. 10.01) |
| D 5046 - 92 |
Fully Crosslinked
Elastomeric Alloys (FCEA) |
| D 5138 - 90 |
Liquid Crystal Polymers |
| D 4745 - 91 |
Filled Compounds
of Polytetrafluoroethylene (PTFE) Molding and Extrusion
Materials |
| D 5204 - 91 |
Polamide-Imide (PAI)
Molding and Extrusion Materials |
| D 5205 - 96 |
Polyetherimide (PEI)
Materials |
| D 5476 - 93 |
Thermoplastic Polyurethane
Materials |
| Test Methods
for : |
| D 5630 - 94 |
Ash Content in Thermoplastics |
| D 3291 - 92 |
Compatibility of
Plasticizers in Poly(Vinyl Chloride) Plastics Under
Compression |
| D 2561 - 95 |
Environmental Stress-Crack
Resistance of Blow-Molded Polyethylene Containers |
| D 3364 - 94 |
Flow Rates for Poly(Vinyl
Chloride) and Rheologically Unstable Thermoplastics,
Measuring |
| D 2538 - 95 |
Fusion of Poly(Vinyl
Chloride) (PVC) Resins Using a Torque Rheometer |
| D 2873 - 94 |
Interior Porosity
of Poly(Vinyl Chloride) (PVC) Resins by Mercury
Intrusion Porosimetry |
| D 2222 - 94 |
Methanol Extract
of Vinyl Chloride Resins |
| D 1705 - 92 |
Particle Size Analysis
of Powdered Polymers and Copolymers of Vinyl Chloride |
| D 5815 - 95 |
Phenolic Antioxidants
and Erucamide Slip Additives in Linear Low Density
Polyethylene Using Liquid Chromatography (LC), Determination
of |
| D 3367 - 95 |
Plasticizer Sorption
of Poly(Vinyl Chloride) Resins Under Applied Centrifugal
Force |
| D 4895 - 94 |
Polytetrafluoroethylene
(PTFE) Resins Produced from Dispersion |
| D 2396 - 94 |
Powder-Mix Time
of Poly(Vinyl Chloride) (PVC) Resins Using a Torque
Rheometer |
| D 5422 - 93 |
Properties of Thermoplastic
Materials by Screw-Extrusion Capillary Rheometer,
Measurement of |
| D 1823 - 95 |
Viscosity, Apparent,
of Plastisols and Organosols at High Shear Rates
by Extrusion Viscometer |
| D 1824 - 95 |
Viscosity, Apparent,
of Plastisols and Organosols at Low Shear Rates
by Brookfield Viscometer |
| D 3030 - 95 |
Volatile Matter
(Including Water) of Vinyl Chloride Resins |
| D 2288 - 92 |
Weight Loss of Plasticizers
on Heating |
| D 3297 - 93 |
Molding and Machining
Tolerances for PTFE Resin Parts |
| D 2115 - 92 |
Oven Heat Stability
of Poly(Vinyl Chloride) Compositions |
| Practices for
: |
| D 5939 - 96 |
Multipurpose Test
Specimens and Bars of Thermoplastics by Injection
Moulding, Preparing |
| D 2383 - 92 |
Plasticizer Compatibility
in Poly(Vinyl Chloride) (PVC) Compounds Under Humid
Conditions, Testing |
| D 1939 - 94 |
Residual Stresses
in Extruded or Molded Acrylonitrile-Butadiene-Styrene
(ABS) Parts by Immersion in Glacial Acetic Acid,
Determining |
| D 5940 - 96 |
Small Plate Test
Specimens of Thermoplastics by Injection Moulding,
Preparing |
| Classification
System for: |
| D 788 - 96 |
Poly(Methyl Methacrylate)
(PMMA) Molding and Extrusion Compounds |
Quality
& Standards
